Technical data sheet for Temposonics R-Series V RH5 SSI magnetostrictive linear position sensor with SSI output, resolution up to 0.1 µm, and 10 kHz update…
This datasheet details the technical specifications of the Temposonics R-Series V RH5 SSI magnetostrictive linear position sensor. It features high shock and vibration resistance, a minimum resolution of 0.1 µm, and supports synchronous measurement with up to 10 kHz update rate. The sensor uses magnetostrictive technology to measure position via torsional strain pulses. It is available with internal linearization and supports differential measurement between two position magnets. The sensor operates in harsh environments with IP67/68 ingress protection and a wide temperature range of -40°C to +85°C.
| Output Interface | SSI (Synchronous Serial Interface) – differential signal in SSI standard (RS-485/RS-422) |
|---|---|
| Resolution | 0.1…100 µm (0.0001…0.1 mm) |
| Update Rate | 10 kHz |
| Stroke Length | 25…7620 mm (1…300 in.) |
| Operating Temperature | -40…+85 °C (−40…+185 °F) |
| Ingress Protection | IP67 (connectors correctly fitted)/IP68 (3 m/3 d) for cable outlet/IP68 (3 m/3 d) & IP69 for angled cable outlet |
| Operating Voltage | +12…30 VDC ±20 % (9.6…36 VDC) |
| Power Consumption | 1.2 W typical |
| Linearity Deviation | ≤ ±40 μm for stroke length ≤ 400 mm |
| Repeatability | < ±0.001 % F.S. (minimum ±2.5 μm) |
The sensor has a minimum resolution of 0.1 µm.
The sensor supports an update rate up to 10 kHz.
The sensor operates from -40°C to +85°C.
The sensor has IP67/68 ingress protection depending on the cable outlet type.