This manual provides operating instructions for TA‑SCOPE water‑flow, air‑flow testers and inverter, covering measurement, data storage, and RS‑232…
The TA‑SCOPE operation manual explains how to use the water‑flow and air‑flow testing instruments and the inverter. It describes the measurement procedures, parameter settings, and how to record and print data.
Key functions include selecting the measurement area (circle, total area, rectangle), storing results with the BAVE key, printing via RS‑232, and configuring communication parameters such as baud rate and flow control. This manual is written in Chinese.
| Baud rate | 9600 bps |
|---|---|
| Data bits | 8 |
| Parity | None |
| Stop bits | 1 |
| Diameter input range | 5–255 cm/inch |
| Maximum stored points | 100 |
Press the CLEAR key to erase all stored measurements.
Press the BAVE key; the data will be recorded in the notebook.
Set Bits per Second to 9600, Data bits to 8, Parity to none, Stop bits to 1, and Flow control to Hardware.
Select the shape type (circle, total area, rectangle) and enter the required dimensions such as diameter, width, and height.