Assembly and use instructions for the T20 Sport Scale Cessna 152 model aircraft, covering the fuselage, wings, tail, landing gear, motor and servos.
This instruction manual guides assembly of the T20 Sport Scale Cessna 152 model aircraft. It covers fuselage installation, wing and tail assembly, landing gear, motor and servo installation, control linkage setup, and center-of-gravity adjustment before test flight.
The document also lists the aircraft dimensions, flying weight, recommended motor, ESC, battery, servo, propeller, and radio channel requirements, along with the tools and balsawood parts needed for construction. This manual is written in Chinese.
| Wingspan | 1200mm |
|---|---|
| Length | 870mm |
| Flying Weight | ≈1000-1200g |
| Recommended Motor | 2216-2814 900-1100KV |
| Recommended ESC | 20A-40A |
| Recommended Battery | 3S 2200-2800mAh |
| Recommended Servo | 9g*4pcs / 6pcs |
| Recommended Propeller | 9-11inch |
| Radio Channels | ≥4CH |
| CG Position | 54mm |
The wingspan is 1200mm and the length is 870mm.
The recommended motor is 2216-2814 900-1100KV, the ESC is 20A-40A, and the battery is 3S 2200-2800mAh.
Cut the balsawood strips to the actual length required before assembly.
Adjust the electronic equipment and the center of gravity, then perform the test flight.