This guide covers initial power-on steps, connecting cables to the Service Processor and network ports, registering the system, and setting up the platform…
This document provides basic instructions for powering on a Sun Fire X2270 server for the first time. It details the necessary steps to install optional components, mount the system in a rack, connect serial and network cables, and power up the unit safely.
The guide explains how to establish an initial connection to the Integrated Lights Out Manager (ILOM) Service Processor using a serial cable with specific baud rate settings (9600 bps). It also covers logging into the ILOM interface with default credentials, registering the system online, and preparing for the installation of supported operating systems like Solaris, Linux, or Windows. This manual is written in Chinese.
| Serial Port Baud Rate | 9600 bps, 8 data bits, no parity, 1 stop bit |
|---|---|
| Default Username | root |
| Default Password | changeme |
The default username is root and the default password is changeme.
The POST may require up to one minute to complete when the server is powered on for the first time.
Detailed installation instructions are available in the Sun Fire X2270 Server Installation Guide.