Specialty Water Technologies Fleck 2815 & Fleck SXT Pre-Treatment Control Valve and Timer Operation Manual

Operation manual for Specialty Water Technologies Fleck 2815 pre-treatment control valves and Fleck SXT timers, including installation and service instructions.


Specialty Water Technologies Fleck 2815 & Fleck SXT Pre-Treatment Control Valve and Timer Operation Manual - cover page
Brand
Specialty Water Technologies
Category
Other
Document type
User Manual
Language
English
Pages
52
File format
PDF
File size
2.4 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
217D033F2A1330128DA1AFFE87C715FF

About this manual

This manual provides operating and service instructions for the Fleck 2815 Pre-Treatment Control Valve and Fleck SXT Timer produced by Specialty Water Technologies. The system is designed for automatic backwashing filters and softeners, featuring a 7-day calendar time clock and an interlock to prevent RO operation during backwash or regeneration cycles.

The document includes detailed sections on theory of operation, installation procedures, and service manuals for various timer assemblies and valve configurations. It also provides specific setup sheets for different tank types, including carbon, de-alkalizer, organic scavenger, softener, and zeolite tanks.

What's inside

  • Warnings and Cautions
  • Theory of Operation
  • Control Valve Service Manual
  • Installation
  • Operating Parameters
  • Timer Setting Procedure
  • Troubleshooting
  • Carbon Tank Setup
  • De-Alkalizer Tank Setup
  • Organic Scavenger Tank Setup

Specifications

Minimum Pressure20 psi / 1.38 bar / 138 kPa
Maximum Pressure125 psi / 8.62 bar / 862 kPa
Minimum Water Temperature34°F / 1°C
Maximum Water Temperature150°F / 65°C
Maximum Humidity75%

Frequently asked questions

What is the minimum water pressure required for the control valve to operate?

A minimum of 20 psi (1.38 bar/138 kPa) is required for the control valve to operate effectively.

What are the temperature limits for installation?

The unit should not be installed where ambient temperatures fall below 32°F (0°C) or rise above 120°F (52°C).

Download PDF (2.4 MB)