Installation and programming guide for the SOLIRIS IB automatic control system for awnings and blinds, featuring wind, sun, and rain detection.
The SOLIRIS IB is an automatic control system designed for Inteo BUS lines to manage awnings and blinds based on environmental conditions. It utilizes a combined sensor to measure wind speed and sunshine intensity, with the option to connect a rain sensor. The device automatically activates or retracts the blind based on these inputs, including dynamic delays to prevent frequent movements due to varying light conditions.
| Class | II+5 |
|---|---|
| Operating temperature | +5°C to +40°C |
| Environmental conditions | dry living areas |
| Relay contacts load | 500 mA / 50V DC |
| Supply voltage | 220 – 240V ~ 50/60Hz |
| Wind speed setting range | 5-80 km/h |
| Brightness setting range | 20-60 kLux |
| Maximum movement time in demo-mode | approx. 30 seconds |
The red LED lights on and the awning is retracted after 2 seconds.
No, all manual commands and sun control commands are inhibited while it rains.
The factory setting for wind speed is approximately 20 km/h.
The timing depends on sun presence duration, ranging from 30 minutes for short periods to 15 minutes for long periods.