SmartWalk TX-S Solar Trail Motion Sensor Installation Instructions

Installation guide for the SmartWalk TX-S microwave sensor, covering mounting, wiring, dip switch configuration, and alignment procedures.

SmartWalk TX-S Solar Trail Motion Sensor Installation Instructions - cover page
Brand
SmartWalk
Category
Other Electronics
Document type
Installation Guide
Language
English
Pages
4
File format
PDF
File size
232 KB
Published
05 November, 2026
Updated
05 November, 2026
MD5 checksum
10733572E8E0E2ABCA6B5016AC7BFBBD
PDF
SmartWalk TX-S Solar Trail Motion Sensor Installation Instructions PDF

About this manual

The SmartWalk TX-S is a microwave sensor designed to monitor trails for users approaching road crossings. It activates warning lights only when trail users are present, up to 60 feet away. The device mounts to existing poles at a recommended height of 10–12 feet using a versatile bracket.

What's inside

  • General Description
  • Installation
  • Wiring
  • Set Up and Alignment
  • Technical Data
  • Warranty

Specifications

Operating Frequency24.125 GHz ± 60 MHz (K-band)
Detection MethodMicroprocessor-Analyzed Doppler Microwave
Power Requirements12V DC ± 10%
Power Consumption1.0W maximum
Temperature Range-22°F to 158°F (-30°C to 70°C)
Size4”W x 4"H x 7"L (10.2cmW x 10.2cmH x 17.8cmL)

Frequently asked questions

What is the recommended mounting height for the SmartWalk TX-S?

The recommended mounting height is 10–12 feet to discourage vandalism and provide an optimum target area.

What is the operating voltage for the sensor?

The operating voltage is 12V DC and must be applied through an isolated power source.

How long does the LED flash after power is applied?

The LED flashes for 10 seconds after power is applied, during which the unit is non-functioning.

Download PDF (232 KB)