Sipasi SPS-3150N three-phase 15 kVA AC variable frequency power supply from Yanghong Power: input/output ratings, protection functions and warranty terms.
This specification sheet from Shenzhen Yanghong Power Technology (深圳市阳宏电源技术有限公司) describes the Sipasi SPS-3150N, a three-phase-in, three-phase-out 15 kVA AC variable frequency power supply with 5 kVA per phase. The unit uses an IGBT/SPWM pulse-width modulation circuit with DDS waveform generation, a fully digital multi-CPU distributed design, and an output isolation transformer. It is stated to deliver more than 80% efficiency and a surge current up to three times the rated current for starting motor-type loads.
The document lists input and output ratings, overall performance figures, protection devices, four-window display specifications, environmental limits, dimensions and weight, and notes the product's CE certification. It also lists reference customers, the intended application fields (home appliances, electrical machinery, motors, medical equipment, electronics manufacturing, IT, laboratories, shipbuilding, ports, avionics and military manufacturing and research), and warranty terms of 3 months free replacement and 12 months free repair from the date of purchase, with lifetime maintenance for out-of-warranty products. This manual is written in Chinese.
| Output capacity | Three-phase 15 kVA; 5 kVA per phase |
|---|---|
| Circuit type | IGBT / SPWM pulse-width modulation |
| Input phase / connection | Three-phase four-wire + PE (ground) |
| Input voltage | 380 V ±10% |
| Input frequency | 50/60 Hz ±5% |
| Power factor | > 0.9 |
| Output voltage, low range | 0–260.0 V line voltage, 0–150.0 V phase voltage, continuously adjustable |
| Output voltage, high range | 0–520.0 V line voltage, 0–300.0 V phase voltage, continuously adjustable |
| Output frequency | 60 Hz / 50 Hz switchable; 40–499.9 Hz in 0.1 Hz steps |
| Frequency stability | ≤ 0.01% |
| Load regulation | < 1% |
| Waveform distortion | ≤ 1–2% into a pure resistive load |
| Efficiency | > 80% |
| Dynamic response time | 20 ms |
| Crest factor | 3.0 : 1.0 |
| Protection devices | Overcurrent, overvoltage, overload, current limiting, over-temperature and short-circuit protection |
| Operating temperature | 0 °C to 40 °C |
| Relative humidity | 10–90% (non-condensing) |
| Altitude | ≤ 1500 m |
| Dimensions (D×W×H) | 670 × 500 × 1055 mm |
| Weight | 210 kg |
It is a three-phase 15 kVA unit, with 5 kVA available per phase.
The unit provides overcurrent, overvoltage, overload, current limiting, over-temperature and short-circuit protection.
Sipasi series products are replaced free of charge within 3 months of purchase and repaired free of charge within 12 months under normal use.
Output frequency can be switched between 60 Hz and 50 Hz, or set from 40 to 499.9 Hz in 0.1 Hz steps.