Installation and wiring section of the Shihlin Electric SL3 Series inverter manual, covering handling, storage, installation, EMC, peripherals and terminal…
The document is the installation and wiring section of the Shihlin Electric SL3 Series inverter manual. It covers handling, storage conditions, installation precautions, EMC-compliant installation, peripheral devices, and system wiring for the SL3 Series.
It also describes main circuit and control circuit terminal wiring, recommended no-fuse breaker and magnetic contactor models, main circuit wiring sizes, grounding, the built-in RFI filter, and control terminal specifications. The provided excerpt covers sections 3.5 through 3.7.5. This manual is written in Chinese.
| Installation ambient temperature | -10 to +40 °C (non-freezing) |
|---|---|
| Installation ambient humidity | 90% RH or less (non-condensing) |
| Storage temperature | -20 to +65 °C |
| Altitude | 2000 m or less |
| Altitude derating | 2% per 100 m above 1000 m |
| Vibration | 5.9 m/s² (0.6G) or less |
| Protection rating | IP20 |
| Digital input impedance | 2.4 kΩ |
| Digital input operating current | 3 mA at 24 VDC |
| Analog input | 0–10 V / 4–20 mA; input impedance 10 kΩ |
| Relay output maximum voltage | 30 VDC or 250 VAC |
| Communication maximum speed | 38400 bps |
| Communication maximum distance | 500 m |
The installation ambient temperature must be from -10 to +40 °C and must not be freezing.
The storage location must have a relative humidity of 0% to 95% with no condensation.
They are connected to the commercial power supply.
The maximum speed is 38400 bps.