User manual for the Sennheiser e 935 microphone, covering installation, operation, cleaning, maintenance, and technical data.
This manual describes the Sennheiser e 935 dynamic cardioid microphone and its supplied accessories, including the MZQ 800 microphone clamp and carrying pouch. It explains mounting, connecting, windscreen use, microphone alignment, positioning, monitor placement, cleaning, and maintenance.
Technical data include a 40 to 18,000 Hz transmission range, 2.8 mV/Pa free-field sensitivity, 350 ohm nominal impedance, XLR-3 connector, 0 to +40 degrees C operating temperature range, 47 x 151 mm dimensions, and 355 g weight. This manual is written in Portuguese.
| Transducer principle | Dynamic |
|---|---|
| Frequency range | 40 - 18,000 Hz |
| Polar pattern | Cardioid |
| Free-field sensitivity | 2.8 mV/Pa |
| Nominal impedance | 350 Ω |
| Minimum terminal impedance | 1 kΩ |
| Connector | XLR-3 |
| Operating temperature range | 0 °C to +40 °C |
| Dimensions | ⌀ 47 x 151 mm |
| Weight | 355 g |
Unscrew the microphone grille, remove the foam protector, clean the inside and outside of the grille with a slightly damp cloth, clean or replace the foam protector if necessary, dry it, then reinstall it and screw the grille back on.
Position the monitors at the angle of greatest cancellation, 180 degrees.
Do not point the microphone directly at the mouth; point it slightly to the side.