Instructions for use for the Sennheiser 901 high-quality pre-polarised condenser microphone with half-cardioid pick-up pattern.
The Sennheiser 901 is a high-quality pre-polarised condenser microphone with a half-cardioid pick-up pattern, especially suitable for use with kick drums. Its extremely thin, high-strength diaphragm delivers a very low bass response and fast transient signals, while incidental rear noise is effectively rejected.
The manual lists features such as a frequency response tailored for kick drum miking, fast attack, very dry and precise low-bass response, an extremely rugged sound inlet basket, a rubber damping plate on the base, a gold-plated XLR connector, and an integrated pre-amplifier. It also covers microphone positioning, polar diagram, frequency response curve, specifications, pin assignment, and an overview of microphone applications. This manual is written in German.
| Transducer principle | pre-polarised condenser microphone |
|---|---|
| Frequency response | 20–20,000 Hz |
| Pick-up pattern | half-cardioid |
| Sensitivity | 0.5 mV/Pa |
| Nominal impedance | < 100 Ω |
| Minimum terminating impedance | 1 k Ω |
| Phantom powering | 48 V / 1.1 mA |
| Maximum sound pressure level | 154 dB SPL at 1 kHz |
| Connector | XLR-3 |
| Weight | 550 g |
| Dimensions | length: 126.5 mm, width: 105 mm, height: 26.5 mm |
The delivery includes the 901 microphone, a pouch, instructions for use, and a warranty certificate.
It is especially suitable for use with kick drums.
Position the microphone at the bottom of the kick drum, approximately 10–20 cm from the batter head.
It requires phantom powering of 48 V / 1.1 mA.