Web-based (eWeb) configuration guide for Ruijie RG-EG series routers, covering login, network setup, device management and FAQs for network administrators.
This document is the Web-Based Configuration Guide for Ruijie Reyee RG-EG series routers. It describes how to manage and configure the devices through eWeb, a Web-based network management system that can be accessed from browsers such as Google Chrome, Firefox and IE10.0 or later. The guide is intended for network engineers, technical support and servicing engineers, and network administrators.
The guide explains the preparation and login procedure, including the default management address 192.168.110.1, and walks through the initial Network Setup pages: Discover Device, Add to My Network, and Create Network & Connect. Later chapters cover eWeb configuration, device password settings, scheduled reboot, and reboot or reset to factory settings, followed by a FAQ chapter on login problems, forgotten passwords and subnet mask values. Related documents such as the Command Reference and the Hardware Installation and Reference Guide are referenced in the preface.
| Default management IP address (EG device) | 192.168.110.1 |
|---|---|
| Default AP IP address | 10.44.77.254 |
| Supported browsers | Google Chrome, Firefox, IE10.0 and later, Chromium-based browsers |
| Recommended client resolution | 1024 x 768 or higher |
| Default management address after factory reset | http://10.44.77.200 |
Check the LAN cable and LED, set the PC to obtain an IP address automatically or use 192.168.110.X with subnet mask 255.255.255.0, test connectivity with ping, and if the problem persists restore the device to factory settings.
Power on the device, press and hold the Reset button for 5 seconds or more and release it when the system LED blinks; the device restores factory settings and restarts, after which the default management address is http://10.44.77.200.
Common values are 8 (255.0.0.0 for class A networks), 16 (255.255.0.0 for class B), 24 (255.255.255.0 for class C) and 32 (255.255.255.255 for a single IP address).
It takes about 60 seconds to deliver and activate the settings.