Recal Unitank CAL user manual: water quality limits, installation warnings, magnesium anode care and technical data for the DHW storage tank.
This Recal user manual covers the ACUMULADOR UNITANK CAL, a sanitary hot water storage tank (DHW tank) for water intended for human consumption. It lists the water conditions required for use, gives installation and operating warnings, and shows the hydraulic connections and DHW circuit layout; connection sizes are given for the 150-500 and 750-1000 sizes. Technical data are stated to be shown on the label applied to the product, and a 5-year guarantee is indicated.
The warnings are repeated in Italian, English, German, French and Spanish: the installer must check the flange bolts before start-up with a maximum tightening torque of 14 Nm, a suitably sized expansion vessel must be installed, a safety valve must be fitted in the cold water inlet and checked every month, the magnesium anode must be checked and replaced as instructed, and the grounding connection is mandatory. The product is not suitable for water from private wells or uncontrolled springs. This manual is written in Spanish.
| Minimum water hardness | 6.0ºD |
|---|---|
| Water pH range | 6.5 to 9.5 |
| Maximum flange bolt tightening torque | 14 Nm |
| Operating pressure | 10 bar |
| Test pressure | 15 bar |
| Internal coating standard | DIN 4753 |
| Guarantee | 5 years |
A minimum water hardness of 6.0ºD is specified. Water with a hardness above 17ºdH (30ºTH) should be treated with specific products to avoid excess limestone build-up.
No. The manual states the product is not suitable for water from private wells or an uncontrolled private source.
Operation of the safety valves must be checked periodically, every month.
Yes, the manual states that the grounding connection is mandatory.