User manual for the Raycus RFL‑QCW300 fiber laser covering safety, installation, operation, and warranty.
The Raycus RFL‑QCW300 fiber laser manual provides essential safety information, product specifications, and guidelines for proper installation and use. It includes detailed sections on laser safety classifications, required protective eyewear, and electrical grounding requirements.
The document also describes the software configuration tools, Ethernet networking setup, and warranty procedures, ensuring users can operate and maintain the laser system safely and efficiently. This manual is written in Chinese.
| Maximum average power (pulse mode) | 300 W |
|---|---|
| Maximum peak power | 3000 W |
| Repetition frequency | 0‑5000 Hz |
| Pulse width | 0.05‑50 ms |
| Maximum pulse energy | 30 J |
| Wavelength | 1080 ± 5 nm |
| Output power stability | ±1.5 % |
| Continuous operation time | ≥6 h |
| Operating temperature | 25 °C |
Users must wear laser safety glasses that are certified for the 1080 nm wavelength and provide appropriate protection.
A 48 VDC power supply rated above 3000 W is required, with proper polarity and a dedicated DC circuit breaker of at least 30 A.
Configure the Ethernet interface by assigning a static IP address (e.g., 192.168.0.10) on the laser and a compatible address on the PC.
Warranty terms are defined in the manual; repairs and replacements are provided for material or technical defects under normal use, with exclusions for misuse or unauthorized modifications.