Ramset AnkaScrew Screw-In Anchors Medium Duty Product Leaflet

Ramset AnkaScrew screw-in anchors are removable, medium duty rotation-setting anchors for concrete, brick and block, with specs, part numbers and loads.


Ramset AnkaScrew Screw-In Anchors Medium Duty Product Leaflet - cover page
Brand
RAMSET
Category
Industrial Supply
Document type
Product Leaflet
Language
English
Pages
2
File format
PDF
File size
566 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
54D12BFCC2ACD552421416C3D7597848

About this manual

This Ramset leaflet presents the AnkaScrew™ screw-in anchor, a fully removable, medium duty, rotation setting, thread forming anchor for temporary or permanent fixing into concrete, solid brick, solid block, hollow block, hollow slab and hollow brick. The anchor is made of hardened high carbon steel with a single self-tapping thread and a 25° thread helix angle that reduces setting torque; it is fixed through the fixture and set by rotation, so no expansion pressure is applied and the substrate is not burst.

The document lists features and benefits, a specification table covering material, corrosion protection, head style, fixing and setting method, and available diameters and lengths, plus indicative working tensile and shear loads in 32 MPa concrete. A part number table covers zinc plated and mechanically galvanised versions in sizes from 5 mm to 16 mm, with maximum fixture thickness, drilled hole diameter and depth, minimum hole depth and effective anchor length. A three-step installation sequence, trades and applications, and a list of related products are also included.

What's inside

  • Features & Benefits
  • Description
  • Specification
  • Trades & Applications
  • Installation
  • AnkaScrew™ Screw-In Anchors - Zinc Plated & Mechanically Galvanised part numbers
  • AnkaScrew™ Screw-In Anchors - Indicative Working Loads in 32MPa Concrete
  • Related Products

Specifications

MaterialHigh Carbon Steel
Corrosion ProtectionZinc Plating, Mechanical Galvanising
Head StyleFlanged Hex (5mm & 6mm), Hex (8mm, 10mm & 12mm)
Fixing MethodThrough Fixture
Setting MethodRotation
Anchoring MethodThread Forming
Drilled Hole Diameters5mm, 6mm, 8mm, 10mm, 12mm
Anchor Lengths30mm, 50mm, 60mm, 75mm, 100mm, 150mm
Indicative Working Max Tensile Loads in 32MPa Concrete1.4kN - 14.4kN
Indicative Working Max Shear Loads in 32MPa Concrete1.5kN - 16.7kN
SubstratesConcrete, Solid Brick, Solid Block, Hollow Block, Hollow Slab, Hollow Brick
Thread Helix Angle25°

Frequently asked questions

How do you install AnkaScrew screw-in anchors?

Drill or core a hole to the recommended diameter and depth using the fixture as a template, clean the hole, insert the anchor through the fixture and screw it in with a socket wrench or impact wrench until the fixture is held firm.

Can the AnkaScrew anchor be removed?

Yes. It simply screws out and leaves an empty hole with no protruding metal parts to grind off.

What happens if resistance is felt while tightening the anchor?

Unscrew the anchor one turn and re-tighten, taking care not to over tighten.

In which substrates can the AnkaScrew anchor be used?

Concrete, solid brick, solid block, hollow block, hollow slab and hollow brick.

Download PDF (566 KB)

More RAMSET Manuals


View all RAMSET manuals →