Step-by-step instructions for installing PowerStop Evolution ceramic brake pads, including rotor inspection, caliper piston retraction, and pad bedding…
This document provides a step-by-step guide for replacing brake pads on most cars. It covers safety precautions, necessary tools like DOT 3 or 4 brake fluid and C-clamps, and the process of removing wheels to inspect rotor thickness and pad wear depth.
The guide details the mechanical steps for disassembly, including removing caliper bolts, retracting pistons using a C-clamp (with specific notes on rear brakes), cleaning rails, and resurfacing or replacing rotors. It concludes with reinstallation instructions and a critical 'pad bedding' procedure to prevent rotor warping.
| Minimum Pad Depth for Replacement | 3/16 inch |
|---|---|
| Immediate Replacement Threshold | 1/8 inch |
The guide recommends using a bottle of DOT 3 or 4 brake fluid as specified in your vehicle's owner's manual.
Perform five moderate to aggressive stops from 40 mph to 5 mph without cooling, followed by five moderate stops from 25 mph to 5 mph with cooling intervals.
The guide specifies that rotor runout should be less than +/- .001 inch.