Installation, maintenance, and user instructions for the Portway PGSL**RN2 gas stove designed for natural gas use in UK and Ireland.
This manual provides detailed instructions for installing, maintaining, and operating the Portway PGSL**RN2 gas stove. It covers flue compatibility, safety requirements, and operation with natural gas at 20 mbar. Sections include unpacking, flue installation methods, fuel bed assembly, commissioning, and user controls. Safety warnings and compliance with UK/Ireland regulations are emphasized.
The stove is designed for use with natural gas (G20) and includes features like a spillage monitoring system to shut off the fire in case of flue blockage. It requires a minimum flue height of 3 meters and specific clearances to combustible and non-combustible surfaces. Installation must be performed by a Gas Safe Registered Installer in accordance with British and Irish standards.
| Max. Gross Heat Input | 6.9kW |
|---|---|
| Min. Gross Heat Input | 4.2kW |
| Gas Rate | 0.654 m³/hr |
| Cold Pressure | 20.0+/-1.0 mbar |
| Ignition | 4.5v battery / electronic ignition |
| Electrode Spark Gap | 4.0mm |
| Packed weight (without fender) | 84kg |
| Efficiency (coal) | 61% |
| Efficiency (log) | 59% |
The maximum gross heat input is 6.9kW.
The stove requires a cold pressure of 20.0+/-1.0 mbar for natural gas (G20).
The efficiency is 61% when using coal.
The minimum effective flue height must be 3 metres.