Firmware update procedure for the Pioneer DJ DJM-S9, including version check, update steps, troubleshooting, and system requirements.
This document explains how to check the current firmware version of the DJM-S9, prepare the mixer and computer, and run the firmware update program.
It also covers abnormal termination handling, including when the DJM-S9 is not recognized, and lists supported operating systems and approximate update time. This manual is written in Japanese.
| Supported Windows versions | Windows 10 / Windows 8.1 / Windows 7 |
|---|---|
| Supported macOS versions | OS X 10.12 / 10.11 / 10.10 / 10.9 |
| Update time | About 2 minutes |
Connect it to the computer with a USB cable, then press and hold the left deck BACK and PARAMETER 1 LEFT buttons while turning power on for about 3 seconds. The PANEL/UTILITY button lights and turns off, and the CLIP indicator blinks; it does not blink for firmware version 1.03 or earlier.
Check that the USB cable is connected to the USB-A terminal. If it still appears, uninstall the DJM-S9 driver software, update the firmware again, then reinstall the driver software after the update.
About 2 minutes.
Windows 10, Windows 8.1, Windows 7, and macOS OS X 10.12, 10.11, 10.10, and 10.9.