One-page French guide for the Pascal Rosier acrylic resin system, covering mixing, uses, characteristics, and precautions.
This guide describes the Pascal Rosier acrylic system, supplied as a 15 kg kit with 5 kg of odorless acrylic resin and 10 kg of white mineral powder. It states that the kit is stored for 6 months in closed packaging, protected from cold and frost.
The guide explains mixing by mechanical agitation, use as a casting, molding, or gel-coat material, and application with special mat/roving reinforcement. It also lists characteristics such as working time, demolding time, compressive and flexural strength, and precautions including never adding water. This manual is written in French.
| Kit size | 15 kg kit (5 kg resin + 10 kg powder) |
|---|---|
| Storage life | 6 months in closed packaging, protected from cold |
| Mixing ratio | 100 parts powder to 45-50 parts resin |
| Gel-coat resin content | 45% resin |
| Thickener addition | 0.1 to 1% |
| Working time at 20 C | 30 minutes |
| Demolding time at 20 C | 3 hours |
| Compressive strength | 55 +/- 5 N/mm2 |
| Flexural strength | 22 +/- 3 N/mm2 |
| Shrinkage | Approximately 0 |
No, water must never be added to the acrylic system.
It can be stored for 6 months in closed packaging, protected from cold and frost.
The minimum demolding time is 3 hours at room temperature.
The guide lists a mixing ratio of 100 parts powder to 45-50 parts resin.