User manual for the ODOT MG-CANEX CANopen to Modbus TCP protocol converter.
The ODOT MG-CANEX is a protocol converter that bridges CANopen networks with Modbus TCP. It operates as a CANopen master with NMT management and as a TCP server that can serve up to ten simultaneous clients, allowing integration with PLCs and HMI software.
The manual covers product overview, hardware description, installation dimensions, wiring, indicator LEDs, configuration of pass‑through and mapping modes, CANopen network control, and detailed CANopen protocol basics such as NMT, SDO, PDO and emergency objects. This manual is written in Chinese.
| Input voltage range | 9~36 VDC |
|---|---|
| Isolation voltage | 3 kV |
| Power consumption | Max 110 mA @ 24 V |
| Operating temperature | -40 °C ~ 85 °C |
| Ethernet ports | 2 RJ45, 10/100 Mbps auto‑negotiation, with switch function |
| Maximum TCP clients | 10 |
| Supported CAN bus modes | CANopen, CAN2.0A, CAN2.0B |
| CAN bus baud rate | 10 kbit/s ~ 1 Mbit/s |
| Modbus TCP function codes | 0x01‑0x06, 0x0F, 0x10 |
It accepts an input voltage of 9 V to 36 V DC and provides 3 kV isolation.
The converter can serve up to ten TCP clients simultaneously.
It supports CANopen, CAN2.0A and CAN2.0B.
Function codes 0x01‑0x06, 0x0F and 0x10 are supported.