O.E.M. Products CYCLONE operations and maintenance manual covering description, specifications, safety, controls, start-up, operation, maintenance and parts…
This operations and maintenance manual from O.E.M. Products, Inc. describes the CYCLONE, a battery-powered surface preparation machine that removes surface coverings and coatings with a weighted, sharpened blade pushed forward by a hydrostatic skid-steer drive. It opens with a general description and a short specifications table listing weight, hydraulic fluid capacity, travel speed and dimensions.
The remaining sections cover safety and precautions, the instrument and control layout including the blade control valve positions, start-up and break-in, machine operation and preventive maintenance. The back of the manual contains illustrated parts lists for the frame and cowlings, hydraulic drive components, the hydrostat system and the electrical components, with part numbers and quantities.
| Weight | 3000 lbs |
|---|---|
| Hydraulic fluid capacity | 3 gallons |
| Travel speed | 350 ft per minute |
| Minimum length | 46 in |
| Width | 26 in |
| Drive motor | 36 Volt electric motor |
| Battery | 6 Volt 400 AH AGM |
It is designed for surface preparation only: a weighted, sharpened blade is lowered onto the floor and moved forward to lift off surface coverings and coatings.
The machine weighs 3000 lbs.
A 200 foot buffer safety zone should always be allowed around all surface preparation activity.
All operators must be over 18 years of age and must have read and reviewed the safety and procedures manual before operating the machine.