User manual for the Nitto Kohki ATRA ACE WA-5000 portable magnetic drilling machine, covering safety, setup, operation, maintenance, and parts.
This manual gives the original instructions for the Nitto Kohki ATRA ACE WA-5000 portable magnetic drilling machine. It covers safety instructions, package contents, part names, electric control functions, preparation, operation, troubleshooting, maintenance and inspection, service parts ordering, and parts lists.
The WA-5000 uses a single-phase 220-240 V AC 50/60 Hz power source and has a rated power consumption of 1150 W. It accepts one-touch JETBROACH and HI-BROACH annular cutters, has a magnet holding power of 9800 N, and weighs 23 kg.
| Model | WA-5000 |
|---|---|
| Power source | Single phase, 220-240 V AC, 50/60 Hz |
| Rated power consumption | 1150 W |
| Rated current | 5.4 A |
| No-load speed | 350/650 min-1 |
| Load speed | 250/450 min-1 |
| Magnet power consumption | 75 W |
| JETBROACH hole diameter | 12 to 50 mm dia. |
| JETBROACH maximum plate thickness | 75 mm |
| HI-BROACH hole diameter | 14 to 50 mm dia. |
| HI-BROACH maximum plate thickness | 50 mm |
| Magnet holding power | 9800 N |
| Magnet dimensions | 101 mm × 201 mm |
| Weight | 23 kg |
| Short-circuit current rating | 5 kA |
| Sound pressure level | Maximum 85 dB(A) |
| Sound power level | Maximum 98 dB(A) |
The WA-5000 operates on single-phase 220-240 V AC, 50/60 Hz.
The maximum plate thickness for JETBROACH is 75 mm.
Only one-touch type annular cutters can be used; side-lock type annular cutters cannot be used.
The WA-5000 weighs 23 kg.