Ningce Technology DY-7 user manual for fusible resistor impact-resistance testing, covering specifications, principle, and operation.
The DY-7 is used for impact-resistance testing of fusible resistors. It provides adjustable DC voltage output, selectable charging capacitance, repeat cycle and discharge time settings, preset test counts, and DC voltage measurement.
The manual explains the operating principle and gives setup and safety notes, including external capacitor polarity and discharge paths. This manual is written in Chinese.
| Output DC voltage | 0~250 V continuously adjustable (must not exceed 250 V) |
|---|---|
| Rated output power | ≤500 VA |
| Maximum pulse current | ≤50 A |
| Charging capacitance | 10, 15, 20, 25, 30, 35, 40, 45 μF (eight ranges); error ±5%; external capacitor can be connected |
| Test repeat cycle and discharge time | Minimum 1 s, maximum 99 min |
| Preset test count | Up to 99999 |
| DC voltmeter accuracy | ±2% |
| Load simulated internal resistance | R = 5.1 kΩ, 20 W power resistor |
The output DC voltage is continuously adjustable from 0 to 250 V and must not exceed 250 V.
It has eight settings: 10, 15, 20, 25, 30, 35, 40, and 45 μF, with a capacity error of ±5%, and an external capacitor can be connected.
The maximum preset number is 99999 cycles.
The DC voltmeter (DVC) has a measurement accuracy of ±2%.