NightSearcher Galaxy 6000-110 floor-standing work light user manual: 2 light modes, 2 x 110V AC sockets, IP54 rating, setup, safety and warranty.
This is the user manual for the NightSearcher Galaxy 6000-110, a floor-standing A-frame work light with a built-in heat sink on the rear side. The unit has 2 light modes (one side on or both sides on), controlled by a mode switch on the back of the light, a diffused lens, and 2 x 110V AC socket outlets (CEE & IP54) for connecting other electrical tools or linking lights. Product size is 220x175x330mm and weight is 3.20kg; it is supplied with a 2m H07RN-F 3G x 1.50mm2 cable and CEE plug.
Operation is described in several languages: unclip the clip on the bottom of the case, place the light on a stable surface or mount it on a tripod (SPTRIPOD1.9, sold separately), then open out the two sides and adjust the housing to the desired angle. The manual gives safety warnings (IP54 rated and suitable for outdoor use, store in a clean dry area, do not lift by the cable, never connect a 110V unit to a 230V mains supply, total socket output must be less than 1500W), disposal advice for waste electrical products and batteries, and 36-month warranty terms from NightSearcher Limited.
| Product size | 220x175x330mm |
|---|---|
| Product weight | 3.20kg |
| Part number | NSGALAXYAC6000-110V |
| Ingress protection | IP54 rated, suitable for outdoor use |
| Light modes | 2 modes: one side on or both sides on |
| AC socket outlets | 2 x 110V AC (CEE & IP54) |
| Maximum total socket output | Less than 1500W |
| Power supply | 110V |
| Supplied cable | 2m H07RN-F 3G x 1.50mm2 cable + CEE plug |
It requires a 110V power supply from a 110V generator or from the mains via a suitable transformer. A 110V unit must never be connected directly to a 230V mains supply.
It has 2 modes of operation: one side on or both sides on. The mode switch is on the back of the light.
Yes, it can be used as a floor light or mounted onto a tripod, which is sold separately as SPTRIPOD1.9.
The total output of the electricity socket must be less than 1500W.