Step-by-step instructions for replacing the rear roller, chain, and bearings on a Newton Crouch spreader, including safety precautions and technical tips.
This guide provides detailed instructions for replacing the rear roller on a Newton Crouch spreader. The process involves loosening the take-up screw to remove chain tension, removing the chute and gate brace, and detaching the roller from the pillar block bearings. It also covers the removal and replacement of the conveyor chain and splice pins.
A 1” wrench is used to loosen the nut on the take-up screw.
The distance must be 3 ½” from front roller bearing bracket to end of side runner.
A 9/16” wrench is used to remove the bolts from the gate screw brace.
A nut must be placed on the end of the splice pin and tightened using pliers and a wrench.