Newton 503 is a 3 mm high-density polyethylene cavity drain membrane for walls, soffits and floors in Newton System 500, with a 30-year product warranty.
Newton 503 is a cavity drain waterproofing and damp-proofing membrane for internal use above or below ground on retaining walls, vaulted soffits and floors. It can be used as part of Newton System 500, which includes Newton drainage and pumping systems; fixing and finishing details are covered in the Newton Installation Manual.
The membrane is made from high-density polyethylene and is supplied in 2.00 m by 20.00 m rolls covering 40.00 m², with a weight of 23.00 kg. Newton states a 30-year product warranty and a life expectancy of at least 50 years (DIN 9001:2000); the membrane is inert and resistant to water, alkalies, saline solutions and organic acids.
| Width | 2.00 m |
|---|---|
| Length | 20.00 m |
| Area | 40.00 m² |
| Colour | White |
| Weight | 23.00 kg |
| Raw material | High Density Polyethylene |
| Thickness | 0.50 mm |
| Stud height | 3.00 mm |
| Compressive strength | >200 kN/m² |
| Drainage capacity | 1.05 litres/sec/m² |
| Vicat softening temperature | 126 ˚C |
It is a cavity drain waterproofing and damp-proofing membrane for internal use above or below ground on retaining walls, vaulted soffits and floors.
Newton 503 has a product warranty of 30 years and a life expectancy of at least 50 years.
Newton 503 is made from high-density polyethylene.
Yes, Newton 503 can be used within Newton System 500, which includes Newton drainage and pumping systems.