Product data sheet for Natursil Natursteinsilicon, a neutral one-component silicone sealant for permanent joints in stone and sanitary areas.
Natursil Natursteinsilicon is a ready-to-use, neutral one-component silicone sealant that vulcanizes to an elastic product through reaction with air moisture at room temperature. It is intended for permanent sealing of connection and movement joints throughout stone areas: floor, wall, ceiling and sanitary. It is not suitable for underwater or exterior facade joints.
The data sheet lists migration-free and stone-compatible behavior, neutral crosslinking, UV, weather and aging resistance, mold and bacteria inhibition, humidity resistance and abrasion resistance. Application requires dry, load-bearing surfaces free of dust and release agents; sufficient air supply and air exchange are needed for rapid curing. Processing temperature is +5°C to +40°C. Standard packaging is 310 ml cartridges, 20 per carton, with 12 months storage for cartridges in cool, dry original containers. This manual is written in German.
| Crosslinking system | Oximvernetzend/neutralvernetzend |
|---|---|
| Specific gravity | ca. 1.02 g/cm³ |
| Processing temperature | +5°C to +40°C |
| Temperature resistance | -60°C to +150°C |
| Shore A end hardness | ca. 24 to 40 |
| Modulus at 100% elongation | ca. 0.4 N/mm² |
| Permitted total deformation | 25% |
| Skin formation time | 12 to 30 minutes |
| Vulcanization rate | ca. 1 mm per day |
| Packaging | 310 ml cartridges, 20 per carton |
| Storage life for cartridges | 12 months |
It is used for permanent sealing of connection and movement joints in stone areas such as floors, walls, ceilings, and sanitary areas; it is not suitable for underwater or exterior facade joints.
The processing temperature is +5°C to +40°C.
The skin formation time is 12 to 30 minutes.
Store original containers cool and dry; cartridges have a shelf life of 12 months.