Nanjing TopPower TP4056 1A Linear Lithium-Ion Battery Charger Datasheet

Datasheet for the Nanjing TopPower TP4056, a 1A linear lithium-ion battery charger with programmable current, 4.2 V regulation and charge status outputs.


Nanjing TopPower TP4056 1A Linear Lithium-Ion Battery Charger Datasheet - cover page
Brand
南京拓微
Category
electronic components
Document type
Datasheet
Language
Chinese
Pages
17
File format
PDF
File size
965 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
54671994137CD72F666FE17EBC3F4427

About this manual

TP4056 is a complete single-cell lithium-ion battery linear charger using constant-current/constant-voltage operation. It is offered in an 8-pin ESOP/EMSOP package with a heat-sink pad on the bottom, and it can operate from a USB supply or an adapter supply. The charge voltage is fixed at 4.2 V, and the charge current is set by an external resistor. Internal PMOSFET architecture and reverse-charge protection eliminate the need for an external isolation diode.

Thermal feedback automatically adjusts the charge current to limit chip temperature under high-power or high-ambient-temperature conditions. Charging terminates automatically when the current falls to 1/10 of the set value, and the device automatically starts a new cycle when the battery voltage falls below the recharge threshold. Status outputs indicate charging and charge completion. Applications listed in the datasheet include mobile phones, PDAs, MP3/MP4 players, digital cameras, electronic dictionaries, GPS and portable equipment. This manual is written in Chinese.

What's inside

  • Applications
  • Description
  • Features
  • Absolute Maximum Ratings
  • Package/Ordering Information
  • Electrical Characteristics
  • Typical Performance Characteristics
  • Pin Functions
  • Block Diagram
  • Principle of Operation

Specifications

Programmable charge currentUp to 1000 mA
Preset charge voltage4.2 V, ±1% accuracy
Standby supply current55 µA
Battery leakage current in low-current stateLess than 2 µA
Trickle charge voltage2.9 V
Package8-pin ESOP/EMSOP with heat-sink pad
Operating ambient temperature range-40°C to 85°C
Maximum junction temperature145°C
BAT pin current (absolute maximum)1200 mA

Frequently asked questions

What is the preset charge voltage of the TP4056?

It has a 4.2 V preset charge voltage with ±1% accuracy.

How is the charging current programmed?

An external resistor connected from PROG to ground sets the charging current.

When does the TP4056 terminate a charge cycle?

It terminates automatically when the charge current falls to 1/10 of the set value after reaching the final float voltage.

What happens when the input supply is removed?

The TP4056 enters a low-current state and reduces battery leakage current to below 2 µA.

Download PDF (965 KB)