MUJI aluminium indoor airer user guide: parts checklist, assembly steps, 5 kg/2 kg load limits, dimensions, materials and cleaning instructions.
This is MUJI's "How to set up/User Guide" (ver.2022.09) for the Aluminium Indoor airer, an indoor clothes drying rack made of aluminium alloy pipes with ABS resin connection parts and casters. The document carries the usage number 4550344832011, the note MADE IN VIETNAM, and MUJI's contact details with www.muji.com.
The guide starts with the meaning of the safety symbols (prohibited and mandatory actions), then gives a parts checklist for the pipe sections, support set and casters, followed by step-by-step assembly using the pre-attached screws and the hexagonal wrench. It ends with the specifications table (installed and stored dimensions, product weight, withstand loads, materials), rules for regular checking of screws and cleaning with a dry cloth, and the contact information for the store of purchase. This manual is written in Japanese.
| Product name | Aluminium Indoor airer (Indoor Clothes Drying Rack) |
|---|---|
| Product weight | Approx. 2 kg |
| Dimensions when installed | Approx. W 730 × D 630 × H 1505 mm |
| Dimensions when stored | Approx. W 730 × D 105 × H 1530 mm |
| Withstand load | Upper pipe 5 kg, lower pipe 2 kg, total 7 kg when the weight is applied evenly |
| Materials | Pole: aluminium alloy; connection part: ABS resin; castor: polypropylene (UK)/olefin (US), polycarbonate resin, steel |
| Country of origin | Vietnam |
| Intended use | Indoor clothes drying rack for indoor use only |
The upper pipe withstands 5 kg and the lower pipe 2 kg, 7 kg in total when the weight is applied evenly.
Insert the four provided casters and push each one in securely until you hear a click sound.
No. It is an indoor drying rack and should not be left outdoors or in direct sunlight and water.
Clean it with a dry cloth; do not use an organic solvent such as thinner or benzine.