Instruction manual for the Motosega Ranger 39 and Ranger 46 petrol chain saws, covering safety warnings, controls, and guide bar and chain installation.
This instruction manual covers the Motosega Ranger 39 (YD-KU03-38) and Ranger 46 (YD-KU01-45A) petrol chain saws. It explains the safety symbols and warnings, including the risks of kickback, and lists precautions for safe operation, fuel handling, and maintenance.
The manual also describes the controls and their positions on the machine, and gives step-by-step instructions for installing the guide bar and chain, adjusting chain tension, and tightening the cover nuts. This manual is written in Italian.
| Models covered | Ranger 39 (YD-KU03-38) and Ranger 46 (YD-KU01-45A) |
|---|---|
| Guide bar cover nut tightening torque | 12~15 N.m |
| Minimum refueling distance | At least 3 meters from the refueling point |
| Bystander distance when starting | At least 10 meters |
Hold the portable chain saw firmly with both hands, wrapping the thumb and fingers around the handle, with the left hand on the front handle.
Make sure the chain saw is not in contact with any object and that the working area is free of obstacles.
Loosen the nuts, remove the chain cover, fit the chain on the sprocket and around the guide bar, mount the bar on the power unit, then refit and tighten the cover.
Hold the top of the guide bar and turn the tensioner screw until the tensioner straps just touch the lower side of the rail, then tighten the tensioner screw.