Minitrol HT-Series and JT-Series Reverse Osmosis System User's Manual

User manual for Minitrol HT-Series and JT-Series reverse osmosis systems covering installation, operation, maintenance, and troubleshooting.


Minitrol HT-Series and JT-Series Reverse Osmosis System User's Manual - cover page
Brand
Minitrol
Category
Other
Document type
User Manual
Language
English
Pages
33
File format
PDF
File size
4 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
5FD1A9CA797BB275DA58A5907EB6070D

About this manual

This user’s manual covers the HT-Series and JT-Series reverse osmosis systems. It outlines installation, operation, maintenance, and troubleshooting details for sustained system performance.

The document includes feed water and operating specifications, rejection and recovery formulas, plumbing and electrical requirements, membrane element information, initial start-up, flushing, storage, and warranty information.

What's inside

  • Safety
  • Feed Water and Operation Specifications
  • Rejection, Recovery, and Flow Rates
  • System Requirements and Operation Guidelines
  • Electrical
  • Membrane Elements
  • Membrane Installation, Removal and Replacement
  • Initial Start-Up
  • Operation and Maintenance
  • Reverse Osmosis System Troubleshooting

Specifications

Feed Temperature40–85°F
System Inlet Pressure45–85 PSIG
Maximum Operating Pressure150 PSIG nominal at 77°F
Maximum SDI Rating< 3
Maximum Turbidity1 NTU
Maximum Free Chlorine and/or Chloramines0 PPM
pH (continuous)3–11
pH (cleaning - 30 min.)2–12
NaCl Rejectionup to 98.5%
Membrane TypeThin Film Composite (TFC) Low Energy

Frequently asked questions

What feed water temperature range is required?

The manual lists a feed temperature range of 40–85°F.

What is the maximum free chlorine and/or chloramines level?

The maximum free chlorine and/or chloramines level is 0 PPM.

How often should the 5 micron sediment filter cartridge be changed?

Change it once a month or when a 10–15 psi differential exists between the two pre-filter gauges.

What should be done before working on the unit?

Turn off the unit, shut off the feed water, and disconnect the electrical power.

Download PDF (4 MB)