MicroCon 0.8 mm pitch dual row board-to-board connector leaflet with technical details, stacking heights, mating tolerances and dimensional drawings.
This leaflet describes the MicroCon dual row connector series with 0.8 mm pitch, intended for demanding applications in the industrial, medical, lighting, automotive and consumer markets. The 50-pin male connector measures only 24.2 mm x 4.7 mm, and the series is offered with reinforced sidewalls, coding and blind-mate guide alignment, and double-sided spring contacts. Parallel (mezzanine), right angle (90°) and coplanar configurations are available, with board-to-board distances from 5 mm to 19 mm for mezzanine applications.
The document lists electrical and mechanical characteristics such as current rating per contact, contact resistance, insulation resistance, mating cycles and processing conditions for SMT termination, together with mating tolerances of ± 0.7 mm and ± 4 degrees. It also includes advantages such as locating pegs, polarization features, solder clips and lockable cable assemblies, plus dimensional drawings with recommended layouts for vertical male, vertical female, right angle male and right angle female versions.
| Pitch | 0.8 mm |
|---|---|
| Number of pins | 12 - 100 possible |
| Current rating per contact | up to 2.3 A at 20 °C |
| Datarate | up to 3 Gbit/s |
| Termination technology | SMT |
| Operating temperature | -55 / 125 °C |
| Contact resistance | < 35 mΩ |
| Insulation resistance | > 100 MΩ |
| Dielectric strength | 500 V rms contact - contact |
| Mechanical operation | > 500 mating cycles |
| Insertion and withdrawal force | typical value 0.5 N per contact |
| Board-to-board distance (mezzanine) | 5 mm to 19 mm |
| Allowed misalignment tolerance | ± 0.7 mm longitudinal and transverse axes |
| Allowed angular inclination tolerance | ± 4 degrees |
| Coplanarity | < 0.1 mm |
| Reflow soldering temperature | 20 - 40 s at 260 °C |
| Air- and creepage distance | 0.25 mm |
The connector series has a pitch of 0.8 mm.
The mechanical operation rating is more than 500 mating cycles (IEC 60512 test 9a).
With different heights for male and female connectors, board-to-board distances from 5 mm to 19 mm can be realized.
Yes, the robust plastic housing of the female connector resists high temperature and is suitable for lead-free reflow soldering.