This quick reference manual covers the appearance, installation, wiring, power estimation, and I/O characteristics of Megmeet MC200 series PLC main modules…
This document serves as a quick reference guide for the design, installation, connection, and maintenance of the Megmeet MC200 Series Programmable Logic Controller (PLC). It covers both the main module and various I/O extension modules, including unpowered and powered types.
The manual provides detailed information on physical appearance, model specifications, installation requirements such as environmental conditions and DIN rail mounting, and cable connection standards. It also includes power estimation data for different models and explains input/output characteristics for sensor connections. This manual is written in Chinese.
| Operating Temperature Range | -5°C ~ 55°C |
|---|---|
| Input Voltage Range (AC) | 90Vac to 264Vac |
| Maximum Input Current | 1.5A (at 90Vac, full load) |
| Grounding Resistance Requirement | < 100Ω |
| Screw Tightening Torque | 0.5 ~ 0.8 Nm |
For AC power lines, use AWG12/18 (1.0~2.0mm²); for ground wires, use AWG12 (2.0mm²); for input/output signal lines, use AWG18/20 (0.8~1.0mm²).
The PLC must be mounted horizontally on a DIN rail or fixed with screws to a backplate, maintaining at least 20cm distance from devices above and below.
The default input mode is sink type (漏型), which allows connection to NPN sensors using the built-in auxiliary power.