LRP IPC Sport Series Electronic Speed Control User Guide

User guide for LRP IPC Sport-series electronic speed controls: installation, connections, motor suppression, warning notes and specifications.


LRP IPC Sport Series Electronic Speed Control User Guide - cover page
Brand
LRP
Category
Other Electronics
Document type
User Manual
Language
English
Pages
1
File format
PDF
File size
314 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
945458840C2FB38A5115443E94FDC069

About this manual

This user guide from LRP electronic covers the IPC Sport-series electronic speed controls, including the IPC Sport, IPC Super Sport and IPC Pro Sport (order numbers 8347, 8359 and 8362). It explains how to mount the speed control in the model with the supplied double-sided foam tape, how to provide cooling openings, how to keep the unit away from power cables and the receiver aerial, and how to fit the supplied heat-sinks.

The guide then describes the connections to receiver (channel 2) and motor, motor suppression with capacitors and a Schottky diode, the receiver plug wiring for Futaba, Graupner, Acoms, Sanwa and Carson systems, warning notes on polarity, water and short circuits, and a specification table listing voltage range, internal resistance, loads, pulse frequency, weight and size for the three models.

What's inside

  • Installation tips
  • Installation
  • Connections
  • Motor suppression
  • Schottky diode
  • Replacing the plastic plug moulding
  • Warning notes
  • Specification
  • Set-up procedure

Specifications

Voltage range / number of cells (IPC Sport, Super Sport, Pro Sport)4.8-9.6 V / 4-8 cells
Voltage range without BEC4.8-12 V / 4-10 cells
Internal resistance (IPC Sport / Super Sport / Pro Sport)0.0042 / 0.0022 / 0.0012
Momentary load, 1 sec (IPC Sport / Super Sport / Pro Sport)150 A / 230 A / 340 A
Brief load, 30 sec (IPC Sport / Super Sport / Pro Sport)70 A / 85 A / 105 A
Continuous load, 5 min (IPC Sport / Super Sport / Pro Sport)35 A / 50 A / 65 A
Recommended motor (IPC Sport / Super Sport)14-36 turns / 12-36 turns; no limit on IPC Pro Sport
Receiver voltage5.0 V
Pulse frequency (IPC Sport / Super Sport / Pro Sport)2100 Hz / 2300 Hz / 2500 Hz
Weight47 g
Size41 x 36 x 19 mm

Frequently asked questions

What is the voltage range and cell count of the IPC Sport speed control?

It is rated for 4.8-9.6 V with 4-8 cells, or 4.8-12 V with 4-10 cells when used without BEC.

Which receivers does the LRP Multi-Con receiver lead fit?

According to the guide it fits Graupner, Ko-Propo, Futaba, Hitec and LRP Phaser receivers directly.

Can a Schottky diode be used with a forward/reverse speed control?

No. Schottky diodes are for forward/brake units only.

How much does the IPC Sport-series speed control weigh?

The specification table lists a weight of 47 g for all three models.

Download PDF (314 KB)

More LRP Manuals


View all LRP manuals →