This manual covers the installation, operation, maintenance, troubleshooting, and standard solution preparation for the LeiCi WZS-185A Turbidimeter.
The document serves as a user guide for the WZS-185A Turbidimeter manufactured by Shanghai Instrumentation Science Instrument Co., Ltd. It details the unboxing process, instrument structure, and installation procedures including USB communication setup.
The manual provides comprehensive instructions on operating the device, utilizing its functional menu for settings like clock adjustment and data management, and performing measurements based on ISO 7027 standards. It also includes sections on maintenance, common fault troubleshooting, and appendices for driver installation and standard solution preparation. This manual is written in Chinese.
| Measurement Principle | Scattering-Transmittance Light Measurement |
|---|---|
| Standard Compliance | ISO 7027 |
| Measurement Range | (0~20.00)NTU, (20.0~200.0)NTU, (200~1000) NTU |
| Zero Drift | Not exceeding ±0.5%FS/30min |
| Repeatability | Not greater than 0.5% |
| Show Value Error | Not exceeding ±6% |
| Operating Temperature | (5~35)℃ |
| Dimensions | 250×95×60mm (L×W×H) |
| Weight | Approx. 0.4kg |
The instrument uses a scattering-transmittance light measurement principle with automatic chromaticity compensation.
The instrument can store up to 2000 sets of measurement data.
The standard RS-232 communication format is 9600bps, no parity check, 8 data bits, and 1 stop bit.
Common causes include scratches on the turbidity bottle, attached substances, fingerprints, incorrect standard solution calibration, or improper insertion position.