Training guide for the Leica SP8 confocal/multiphoton microscope with LAS AF v3.3, covering power-on, laser setup, imaging, Z-stacks and shutdown.
This training guide was prepared by the Optical Imaging & Vital Microscopy Core at Baylor College of Medicine (2017) for the Leica SP8 confocal/multiphoton microscope running LAS AF v3.3 software. It walks through the power-on routine, starting the LAS software, and initializing the system and stage.
The guide then covers powering on the individual visible lasers, mounting a sample on the microscope, and collecting Z-stacks and time series in the Acquisition Mode. It closes with instructions for saving experiments and shutting the system down, including the extra steps needed when the NLO path with the Chameleon TiS laser and APT was used.
| Software version | LAS AF v3.3 |
|---|---|
| Microscope configuration | With Stage and DM6000 |
| Default file format for saved data | LIF |
| Recommended Argon laser output power | 10% output power |
Double-click the LAS AF icon, choose the configuration and microscope (With Stage and DM6000 respectively), then click OK to initialize the system and select YES when prompted to initialize the stage.
Select 'xyz' in the Acquisition Mode to open the Z-Stack utility, mark the Begin and End positions while scanning live, then click Start.
By default the LAS software saves files in the LIF format, although the format type can be chosen before storing data.
Turn off the lasers, close the LAS software and APT software if used, and shut down Windows before switching off the power strip, laser emission key, power switches and epifluorescence lamp.