Lamello P-System catalogue covering Clamex P, Tenso P and Divario P connectors plus the Zeta P2 cordless biscuit joiner.
The Lamello P-System is a time-saving joining system based on form-locking anchoring. This catalogue covers the Clamex P detachable connectors, Tenso P self-clamping glueing connectors, Divario P-18 sliding-insertion connector, and the Zeta P2 and Zeta P2 cordless biscuit joiners, including CNC processing information and accessories.
Each connector section lists features, joining methods, article numbers and technical data such as size, cutter dimensions, materials, installation tolerance and tensile strength for MDF, particle board and beech.
| Clamex P-14 size | 64 × 27 × 9.7 mm |
|---|---|
| Clamex P-14 cutter | Ø 10 0.4 × 7 × Ø 22 mm |
| Clamex P-14 connector material | Fiberglass reinforced plastic |
| Clamex P-14 lever material | Zinc die cast |
| Clamex P-14 installation tolerance | Long. ± 1 mm / radial ± 1 mm |
| Clamex P-14 tensile strength MDF | Up to 1210 N |
| Clamex P-14 tensile strength particle board | Up to 1070 N |
| Clamex P-14 tensile strength beech | Up to 1870 N |
| Clamex P-14 material range | Particle board, MDF, plywood, softwood, hardwood etc. |
| Clamex P-14 access hole | 6 mm |
| Clamex P-10 size | 52 × 19 × 9.7 mm |
| Clamex P-10 installation tolerance | Long. ± 0.5 mm / radial ± 0.5 mm |
| Clamex P-10 tensile strength MDF | Up to 700 N |
| Clamex P-14/10 Medius size | 64 × 13.5 × 9.7 mm and 52 × 7.5 × 9.7 mm |
| Clamex P-14/10 Medius tensile strength MDF | Up to 810 N |
| Clamex P-14/10 Flexus installation tolerance | Long. ± 0 mm / radial ± 1 mm |
| Clamex P-14/10 Flexus tensile strength MDF | Up to 790 N |
| Clamex P-14 CNC access hole | 5 mm |
| Tenso P clamping force | ~ 80 kg or 170 lb |
| Divario P-18 clamping force | ~ 15 kg or 30 lb |
| Tenso P mitre range | 22.5° – 180° |
It is a time-saving joining system that uses form-locking anchoring, with connectors inserted into a P-System groove instead of screwing or glueing.
Clamex P is a detachable furniture connector, while Tenso P is a self-clamping connector for glueing.
Clamex P-10 is used on mitre joints from 15 mm material thickness and in butt joints from 12 mm.
The flexible positioning pins allow workpieces to be installed in an already assembled cabinet, simplifying the assembly sequence.
It is designed for production on CNC machines and, unlike Clamex P-14, is automatically aligned during assembly.