The Kanglian KL-1060 wireless infrared alarm manual provides product overview, technical specifications, installation steps, detector adjustment, safety…
The KL-1060 wireless infrared alarm consists of a main unit and infrared detector(s) that communicate via high‑frequency coded radio signals. The system operates without wiring between the detector and the main unit, offering a wireless range of up to 1000 m in open areas and supporting up to 60 zones. It is suitable for homes, factories, schools, warehouses and similar locations.
The manual explains how to install batteries, connect the main unit to AC power, adjust detector height and angle, set sensitivity with jumper caps, and configure the antenna for optimal transmission. It also lists safety precautions, the packing contents, and common fault diagnosis procedures such as checking power connections, speaker condition, and address code matching. This manual is written in Chinese.
| Alarm time | 30‑60 seconds |
|---|---|
| Alarm sound level | ≥ 100 dB |
| Wireless transmission distance | up to 1000 m (open area) |
| Operating temperature | -40 °C ~ +60 °C |
| Storage temperature | -50 °C ~ +70 °C |
| Transmission frequency | 315 MHz |
| Number of zones | 60 zones |
| Infrared monitoring range | 7‑15° × 32° |
The main unit can monitor up to 60 zones.
In open areas the system can transmit up to 1000 meters.
Insert the jumper cap to the low, medium, or high position; low gives a short detection distance, high gives a longer distance.
Verify that the power plug is inserted, the outlet has power, the power switch is on, and the power cable is not broken.