Jinglianxun JLX350-019-BN TFT module user manual: 320x480 display, ST7796S driver IC, pin functions, DC parameters, timing, commands and code examples.
This is the Chinese user manual for the Jinglianxun (Shenzhen Jinglianxun Electronics) JLX350-019-BN TFT module, a soldered-FPC display module dated 2020-05-27. The manual introduces the module, lists its features, shows the outline drawing, and explains the 20-pin interface, including the parallel/serial interface selection pin and the backlight supply pins.
Later sections give the basic LCD and backlight principle, maximum ratings, DC parameters, 8080 and 4-wire SPI timing characteristics, power-up reset timing, the command table, and programming examples for both parallel and serial connection to an 8051-series MCU (STC15F2K60S2), ending with a serial interface schematic. This manual is written in Chinese.
| Display resolution | 320 columns x 480 rows dots, color |
|---|---|
| Driver IC | ST7796S |
| Interface mode | Parallel or serial interface |
| Logic supply voltage (VDD) | 2.4 V min, 3.3 V max |
| Backlight voltage (VLED) | 2.9 V min, 3.0 V typ, 3.1 V max |
| Backlight current (ILED) | 40 mA min, 75 mA typ, 100 mA max at VLED = 3.0 V |
| Backlight LEDs | 6 LEDs, each 10 to 20 mA |
| Operating temperature | -20 °C to +70 °C |
| Storage temperature | -30 °C to +80 °C |
| Reset low pulse time (tRW) | 10 us min on RES pin |
| Connection type | Soldered FPC |
The module uses the ST7796S driver IC, which the manual describes as powerful and stable.
It can display 320 columns by 480 rows of color dots, for example 20 characters per line by 30 lines of 16x16 dot Chinese characters.
Pin 18 (IM2/PS) selects the interface: connect it to VSS for parallel mode and to VDD for serial mode.
The maximum ratings table gives an operating temperature of -20 °C to +70 °C and a storage temperature of -30 °C to +80 °C.