Jiangyin Osaka Coating 101EPE 312 Epoxy Ester Iron Oxide Red Primer Data Sheet

Data sheet for Jiangyin Osaka 101EPE 312 epoxy ester iron oxide red primer: volume solids, coverage, spray application, drying times, storage.


Jiangyin Osaka Coating 101EPE 312 Epoxy Ester Iron Oxide Red Primer Data Sheet - cover page
Brand
江阴市大阪涂料
Category
Chemical products
Document type
Product Leaflet
Language
Chinese
Pages
2
File format
PDF
File size
420 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
508CF72799AFD87199B612B20C41406F

About this manual

This two-page product data sheet from Jiangyin Osaka Coating covers the 101EPE 312 epoxy ester iron oxide red primer, a single-pack coating supplied in iron red or light yellow. The iron red version is intended for ferrous metal surfaces, the light yellow version for aluminum and aluminum-magnesium alloy; used together with a wash primer it is said to give strong intercoat adhesion and to improve the salt-spray resistance of the film.

The sheet lists product data (56% volume solids, 40 micron dry film thickness, 10.3 m2/kg theoretical coverage, VOC content 381 g/L), application details such as airless spray nozzle 0.43-0.53 mm at a fluid pressure of at least 17.6 MPa, thinner OUP 103 at 3%-5%, pot life, drying and overcoating times at 5, 23 and 35 degrees C, storage and packaging, surface preparation to Sa 2.5 or St3, and safety measures for solvent-borne coatings. This manual is written in Chinese.

What's inside

  • Product introduction
  • Uses
  • Product data
  • Application details
  • Storage and packaging
  • Technical requirements and surface preparation
  • Limitations
  • Safety measures for solvent-borne coatings
  • Liability statement

Specifications

Volume solids56%
Dry film thickness40 microns (equivalent to 87 microns wet film)
Theoretical coverage10.3 m2/kg
VOC content381 g/L
Mixing ratioSingle-pack
ThinnerOUP 103, recommended addition 3%-5%
Airless sprayNozzle 0.43-0.53 mm; fluid pressure at least 17.6 MPa
Pot lifeUnlimited
Drying time at 23 degrees CTack free 1 h, hard dry 18 h, minimum overcoating interval 18 h
Specific gravityApprox. 1.3-1.4 kg/L
Pack size20 kg in a 20 liter container
Recommended coating buildTwo airless spray coats to a dry film thickness of 80 microns
Steel surface preparationBlast to ISO 8501:2007 Sa2.5, or hand/power tool to St3

Frequently asked questions

Which thinner is recommended for 101EPE 312 epoxy ester iron oxide red primer?

Thinner OUP 103 is recommended, added at 3%-5%. OUP 103 is also given as the cleaner for painting equipment.

How long can the primer be stored?

The storage life is one year, and the product should be kept in a cool, dry environment.

How should steel surfaces be prepared before applying the primer?

Steel should be blasted to Sa2.5 grade per ISO 8501:2007, or cleaned by hand or power tool to St3 grade, and kept clean and dry.

Does the paint need to be mixed with a hardener?

No, it is a single-pack product; the mixing ratio is listed as single-pack.

Download PDF (420 KB)

More 江阴市大阪涂料 Manuals


View all 江阴市大阪涂料 manuals →