The Jablotron TP-150 wireless indoor thermostat measures and regulates temperature, with installation, programming, and battery replacement instructions.
The Jablotron TP-150 is a wireless indoor thermostat used for measuring and regulating temperature. Temperature is set using a knob, and the thermostat regulates a preset temperature 24 hours per day. It can be locked against unwanted manipulation and reports when high or low temperature limits are reached.
The document covers installation, enrollment to a receiver, settings and programming, showing the preset temperature, battery replacement, and use with the AC-116 receiver. Technical specifications and compliance information are also included.
| Power | 2x AA 1.5 V alkaline batteries |
|---|---|
| Battery lifetime | typically 1 year |
| Regulation range | +6°C to +40 °C |
| Temperature regulation sensitivity | adjustable ± 0.1-1 °C |
| Communication band | 868.1 MHz, JA-100 protocol |
| RF range | up to 100 m (open area) |
| Operational temperature | -10°C to +70°C (no condensation) |
| Dimensions | 66 x 90 x 22 mm |
Open enrollment mode on the receiver, then insert the batteries or press and hold the knob for 5 seconds to send an enrollment signal.
Enter the menu, select LOc, and choose ON to enable the lock and block thermostat control.
Use alkaline batteries, type AA 1.5 V.
The RF range is up to 100 meters in open area.