ISC KT86X D2 escape descender kit user manual covering installation, operation, inspection and limits for 7.5 mm and 8 mm ropes.
This user manual covers the ISC KT86X D2 escape descender kits, including kit variants KT861B1, KT862B1 and KT862B2 with 7.5 mm and 8 mm ropes. It describes nomenclature, terminology, anchor and harness installation, operational checks, use, misuse, inspection and escape or self-rescue procedures.
The manual states operating limits such as a 200 m maximum descent height, 140 kg maximum user weight, 2 m/s maximum descent speed and EN341 Type C maximum descent energy of 0.5 x 10^6 J. It also lists suitable and unsuitable harness standards and anchor point requirements.
| Rope diameter | 7.5 mm or 8.0 mm |
|---|---|
| Maximum descent height | 200 m |
| Maximum user weight | 140 kg |
| Maximum descent speed | 2 m/s |
| Maximum descent energy | EN341 Type C - 0.5 x 10^6 J |
| Maximum number of descents | 1 x 200 m or 10 x 30 m |
| Minimum breaking strength | 13.5 kN |
| Load range | 40 kg to 100 kg |
| Anchor point | EN795 (min. 12 kN) or ANSI Z359.1 (07) |
| Suitable harness standards | EN361, EN1497 |
The maximum descent height is 200 m.
Rotate the handle clockwise, in the direction of the arrow.
Harnesses conforming to EN361 or EN1497, or their international equivalents, are suitable.
No. The D2 is not a rescue device and should only be used by one person.