User's manual for the IntesisBox KNX Panasonic AC gateway, covering integration of Panasonic air conditioning systems into KNX TP-1 (EIB) control systems.
This user's manual describes the IntesisBox® KNX – Panasonic AC communication gateway, which integrates Panasonic air conditioning systems into KNX TP-1 (EIB) control systems through PLC, SCADA, or any device with a KNX TP-1 (EIB) interface. It covers integration signals, functionality, capacity, KNX interface, device connections, configuration with LinkBoxEIB, ETS integration, setup and troubleshooting, mechanical and electrical features, AC unit compatibility, and error codes.
Two order codes are covered: PA-AC-KNX-64, supporting up to 64 indoor units, and PA-AC-KNX-128, supporting up to 128 indoor units. The gateway polls the Panasonic CZ-CFUNC2 communication adaptor for configured signals and exchanges status updates and commands with the KNX bus through associated group addresses.
| Maximum number of indoor units | 128 |
|---|---|
| Maximum number of communication objects | 4000 |
| PA-AC-KNX-64 capacity | Up to 64 indoor units |
| PA-AC-KNX-128 capacity | Up to 128 indoor units |
| KNX bus power | 30V DC |
| KNX port isolation | ~2500Vrms AC |
| Outdoor units per link | Up to 30 |
It is a communication gateway for integrating Panasonic air conditioning systems into KNX TP-1 (EIB) control systems, making Panasonic indoor units accessible as part of a KNX system.
The PA-AC-KNX-64 supports up to 64 indoor units, and the PA-AC-KNX-128 supports up to 128 indoor units.
The gateway connects to the Panasonic CZ-CFUNC2 communication adaptor, which is an accessory provided by Panasonic and must be acquired separately.
LinkBoxEIB is the configuration and monitoring tool for the IntesisBox KNX series, used to configure connections and send the configuration to the gateway.