User manual for the Intelbras IVR 1010 video door phone, covering specifications, installation, wiring, programming, and frequently asked questions.
The Intelbras IVR 1010 is a video door phone with a 4.3-inch widescreen TFT-LCD indoor module and an outdoor module that combines a pinhole camera with 2 infrared LEDs for viewing in low light. The outdoor module can release a 12 V electric lock from a push button, and the system supports one additional camera or a garage gate connected to the indoor module.
This Portuguese-language manual covers technical specifications, features, accessories, mounting, cabling distances and cable types, installation of video and audio extensions (model 1010 EA), programming such as brightness, mute and reset, usability, frequently asked questions, a drilling template, and the warranty terms. This manual is written in Portuguese.
| Display | 4.3" TFT-LCD widescreen |
|---|---|
| Screen resolution | 480 × 272 RGB |
| Brightness | 230 cd/m² |
| Operating voltage | 100 to 240 Vac (automatic) |
| Power consumption | 6.5 W in use / 1.5 W on standby |
| Relay output | NO/NC 24 V / 1 A |
| Operating temperature | -10 °C to 50 °C |
| Indoor module dimensions | 20.7 × 19.1 × 6.1 cm |
| Indoor module weight | 408 g |
| Camera | 1/4" pinhole |
| Lens | 3.7 mm |
| Horizontal resolution | 580 lines |
| Camera viewing angle | 92° diagonal |
| Minimum illumination (color) | 1.5 lux |
| Minimum illumination (black and white) | 0.2 lux |
| Infrared LEDs | 2 |
| Electric lock release | 12 V / 1 A |
| Outdoor module dimensions | 9.5 × 14.9 × 5.5 cm |
| Outdoor module weight | 146 g |
| Maximum installation distance | 100 m |
Up to 100 meters with RG-59 coaxial cable (67% or 95% braid) or 1.5 mm² parallel cable, or up to 50 meters with UTP CAT-5e or CAT-6 cable.
No. The video door phone only integrates with analog (CVBS) cameras; HDCVI, TVI and AHD devices are not supported.
It supports 1 video extension and 3 audio extensions of model 1010 EA, allowing up to 8 installation points in total.
Opening the powered outdoor module triggers the Tamper violation signal, which stops when you lift the handset from the hook or press a key on the indoor module.