This Intelbras AMT 4010 SMART installation guide covers technical specifications, features, installation, and wiring for the monitored alarm panel.
The Intelbras AMT 4010 SMART is a monitored alarm panel with advanced technology and easy programming. It has 8 phone number memories, panic and emergency functions, a 24-hour zone, an intelligent battery charger with short-circuit and reverse-polarity protection, timing, sensor test function, and SMART function for XAS 4010 SMART and IVP 4000 SMART sensors in FSK modulation. It can connect to opening, infrared and impact sensors, and reports events to 2 IP destinations, telephone monitoring centers, and optionally via radio (DX-Net).
The guide provides technical specifications and installation instructions, including connectors, battery connection, AC power and ground, auxiliary output, siren, zones, zone and PGM expanders, bus, keypads, receivers, and telephone line. It also includes a quick programming reference and auto-activation section. This manual is written in Spanish.
| AC power supply | 90 to 265 V |
|---|---|
| DC power supply / battery | 12 V battery (not provided) |
| Operating temperature | -10 °C to 50 °C at 90% humidity |
| Dimensions | 27.7 × 25.5 × 8.5 mm |
| Average power, AMT 4010 SMART | 5 W |
| Siren output current | 1 A with battery, 400 mA without battery |
The panel uses AC power from 90 to 265 V.
The panel uses a 12 V battery, which is not provided.
If battery voltage is below 10 V, the siren and auxiliary outputs are disabled.
The maximum capacity is 1.8 A.