User manual for the Inogen One G3 oxygen concentrator, covering intended use, operation, alarms, troubleshooting, cleaning, maintenance, and system…
This manual provides instructions for the Inogen One G3 Oxygen Concentrator, a prescription device that supplies concentrated oxygen through a nasal cannula for use at home, in institutions, in vehicles, on airplanes, and in other mobile environments. It describes the device controls, power supply options, battery operation, audible and visible alarm signals, and cleaning and maintenance procedures.
The document also lists system specifications including dimensions, weight, noise level, oxygen concentration, flow settings, power input, battery duration and charging time, and environmental ranges for use, shipping, and storage.
| Dimensions with single battery | 8.75 in. (22.2 cm.) / 3.0 in. (7.6 cm.) / 7.25 in. (18.4 cm.) |
|---|---|
| Weight | 4.8 pounds (2.19 Kg.) |
| Noise | 39 dBA (on setting 2) for the 5 setting model; 42 dBA (on setting 2) for the 4 setting model |
| Warm-Up Time | 2 minutes |
| Oxygen Concentration | 90% - 3% /+ 6% at all settings |
| Flow Control Settings | 5 settings: 1 to 5 |
| AC Input | 100 to 240 VAC 50 to 60 Hz |
| Battery Duration | Up to 4.7 hours with single battery; up to 10 hours with double battery |
| Battery Charging Time | Up to 5 hours for a single battery; up to 8 hours for a double battery |
| Operating Temperature | 41 to 104˚F (5 to 40˚C) |
A single battery provides up to 4.7 hours of operation, and a double battery provides up to 10 hours.
No. The device is not intended to be life sustaining or life supporting.
There are five flow settings, from 1 to 5.
Charging takes up to 5 hours for a single battery and up to 8 hours for a double battery.