HVA 81000 Series aluminum gate valves for high vacuum use, with specifications, model key guide, port sizes from 1.5 to 12 in ID, and flange options.
The HVA 81000 Series covers aluminum gate valves for high vacuum applications, with port sizes from 1.5 in ID (DN40) to 12 in ID (DN300). The body and major internal components are precision machined from 6061-T6 aluminum billet, and the valves use dual quad ring shaft seals with PEEK on high-cycle internal parts.
The catalog gives specifications, a model key guide for actuator type, seals, solenoid voltage, flange type and position indicator, and per-size pages with dimensions. It also covers options such as alternate flanges, solenoids and seals, plus ANSI, JIS and custom flange models.
| HV pressure range | 1 x 10-7 mbar |
|---|---|
| Helium leak rate (gate) | < 2 x 10-9 mbar l/s |
| Differential pressure | 1.2 bar in either direction |
| Maximum differential pressure before opening | ≤ 30 mbar |
| Valve body and mechanism material | 6061-T6 aluminum |
| Operating temperature, valve body and gate | 150°C |
| Air service | 80 psig (5.5 bar) |
| Port size range | 1.5 in ID (DN40) to 12 in ID (DN300) |
| Cycles until service, sizes 1.5 in to 6 in | 400,000 |
| Solenoid power and voltage | 4.0 Watts, 120 VAC 50/60 Hz |
The standard HV version has a pressure range of 1 x 10-7 mbar, and the valves are intended for high vacuum applications.
Port sizes run from 1.5 in ID (DN40) to 12 in ID (DN300).
Yes. The product features list both manual and pneumatic actuation.
The maximum differential pressure before opening is ≤ 30 mbar.