Installation and setup guide for Hunter Fan Company's programmable control model 99107, covering wiring, Bluetooth setup, and troubleshooting.
This guide walks users through installing the programmable control receiver, connecting wires, and setting up the Bluetooth plug-in controller. It includes safety warnings, wire color instructions, and steps for pairing multiple fans. Troubleshooting tips are provided for common issues like flickering bulbs or remote control problems.
The guide also covers optional ON/OFF remote pairing, battery replacement, and app-based control setup. Users must download the 'simpleconnect' app and ensure Bluetooth is enabled to complete setup. The Bluetooth controller works up to 80 feet from the fan.
Connect the blue wire from the receiver to the light wire (blue or black with white stripe) from the fan. Connect the yellow wire from the receiver to the motor wire (black) from the fan.
The Bluetooth plug-in controller works up to 80 feet from the fan/receiver.
If the remote is not paired, disconnect power from all other fans, turn the fan power back on, and press and hold both the Fan button and the Light button for at least four seconds. The lights will flash and the fan will turn on at low speed to confirm pairing.
Tap the Gear icon in the Room setup screen to visit the settings screen for the appropriate room or fan. If Dimming Mode is on, turn off Dimming Mode. If the problem is not corrected, unpair and re-pair the device with Dimming Mode disabled.