French user manual for a Hotpoint Ariston dishwasher covering product description, salt and rinse aid settings, detergent, and wash programs.
This French-language user manual describes a Hotpoint Ariston dishwasher: the parts of the appliance, the control panel with its buttons and indicator lights, and the daily use instructions. It explains the first use after installation, filling the salt reservoir, setting water hardness, filling and adjusting the rinse aid dispenser, and filling the detergent dispenser.
The manual also contains a wash program table with duration, water and energy consumption for nine programs (Eco 50°, Auto Intensif 65°, Auto Normal 55°, Délicat 45°, Express 30’ 50°, Bonne nuit 50°, Anti-Bactèrian 70°, Trempage, Auto-nettoyant 65°), a description of each program, and notes on standby consumption. Registration and download instructions point to the Hotpoint website. This manual is written in French.
| Salt reservoir capacity | approximately 1 kg |
|---|---|
| Rinse aid dispenser reference mark | 110 ml |
| Rinse aid levels | maximum 4 levels |
| Default water hardness setting | 3 (normal hardness) |
| Standby consumption, on | 5 W |
| Standby consumption, off | 0.5 W |
| Eco 50° program duration | 4:00 h:min |
| Eco 50° water consumption | 9.0 liters/cycle |
Fill the salt reservoir up to the brim, which is about 1 kg, using the funnel. The first time, fill the reservoir with water first.
With the appliance off, hold the P button for 5 seconds until you hear a beep; the current setting number and salt level indicator blink. Press P to select the desired hardness level, then switch the appliance off.
The Eco 50° program lasts 4:00 and uses 9.0 liters of water and 0.74 kWh per cycle.
Pour rinse aid gently up to the reference mark (110 ml) of the filling reservoir, avoiding overflows, then close the cap.