Horus ZW078-A Heavy Duty Z-Wave Smart Switch Installation Manual

Installation and configuration manual for the Horus ZW078-A Heavy Duty Z-Wave Smart Switch, a controller for high-power appliances up to 9600 W / 40 A.


Horus ZW078-A Heavy Duty Z-Wave Smart Switch Installation Manual - cover page
Brand
Horus
Category
switch
Document type
Installation Guide
Language
Spanish
Pages
9
File format
PDF
File size
697 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
25D09A31CE7BC1270A414E99582B9BE0

About this manual

This manual covers the Horus ZW078-A Heavy Duty Z-Wave Smart Switch, a component of a Z-Wave home-control system designed to control, automate and record the electricity consumption of high-power appliances of up to 40 A. The package includes the switch, wire terminals in two gauges, two screws and the factory manual. The switch is rated for a 240 VAC, 50/60 Hz two-phase (L1, L2) supply, a maximum load of 9600 W / 40 A or a 240 VAC 5 HP AC motor, and IP44 water resistance.

The installation section walks through mounting the unit with the supplied screws in an electrical box, identifying the mains wires, cutting power at the breaker or fuse, fitting the AWG 8 or AWG 10 terminals (AWG 10 for loads below 32 A, AWG 8 above), connecting the load and supply terminals, restoring power and refitting the cover. A second section explains pairing through the web interface at horus-sc.com: search for ZW078, follow the wizard, confirm the controller shows the inclusion message, press the Z-Wave button once, then assign the device name and room; exclusion-mode steps are given for retries. Support contacts are listed at the end. This manual is written in Spanish.

What's inside

  • Introduction
  • Product Description
  • Technical Specifications
  • Installation
  • Pairing the Heavy Duty Switch to Your System
  • Controller Exclusion Mode
  • Technical Support

Specifications

Model No.ZW078-A
Power supply240 VAC, 50/60 Hz (2 phases L1, L2)
Z-Wave frequency908.42 MHz (US)
Operating temperature5°C to 40°C
Z-Wave range150 meters line of sight without obstacles
Maximum load9600 W / 40 A or 240 VAC, 5 HP AC motor
Water resistanceIP44

Frequently asked questions

What is the maximum load the ZW078-A can switch?

The switch supports a maximum load of 9600 W / 40 A, or a 240 VAC 5 HP AC motor.

Which wire gauge should I use for the load?

Use AWG 10 when the load current is below 32 A; use AWG 8 when the load current exceeds 32 A. The maximum allowable load is 40 A.

How do I add the Heavy Duty switch to my Z-Wave controller?

Verify the controller is in inclusion mode, then press the Z-Wave button once; the LED blinks and a message confirms the device was added.

Download PDF (697 KB)